A puddle under your washer is never a good sign. Here's how to figure out where the water is coming from before it damages your floor.
A leaking washer can soak your laundry room floor in minutes and, if left unchecked, cause real damage to your home. The good news is that most leaks come from a small handful of causes, and knowing where to look can save you a lot of guesswork.
On front-load washers, the rubber door seal keeps water inside the drum during the cycle. Over time, it can crack, tear, or trap debris that breaks the seal, letting water spill out around the door.
The inlet hoses that supply water and the drain hose that removes it can loosen over time or develop small cracks. A steady drip near the back of the machine usually points to one of these hoses.
Packing in too many clothes can force water past the seals during the spin cycle. If leaks only happen with large loads, this is often the simplest explanation.
Too much detergent, or a non-HE detergent in a high-efficiency machine, creates excess suds that can force water out around the door or through vents.
If the leak is coming from underneath the machine rather than the door, the drain pump or the tub itself may have a crack. This almost always requires a professional repair.
Our certified technicians repair washer leaks of every cause, often on the same day you call.
View Washer Repair Service →Check that the load size matches the machine's capacity, confirm you are using the right detergent type, and take a look at the door seal for visible cracks or trapped debris. Tightening a loose hose connection is also worth trying if you can safely access it.
Most washer leaks trace back to a worn seal, a loose hose, or an overloaded drum. If the simple checks do not solve it, especially if the leak is coming from underneath the machine, it is time to call a technician before the problem gets worse.
Same-day appointments available across Converse, TX and nearby cities.
Call (726) 259-1738
